The Pedrollo TOP Multi-Tech 5 is a high-efficiency, multi-stage submersible pump designed for clean water applications. Ideal for domestic water supply, irrigation, and rainwater harvesting systems, this pump offers reliable performance with integrated electronic controls. 10 GPM @ 50 PSI, 60 PSI shutoff, 1 HP, start point 20 psi (fixed). Automatic dry run protection. Blockage/pump exerciser function. Thermal overload. Class F Insulation. 30' USA grounded plug. 1.25" NHT (or MPT) connection.
External pressure tank recommended, to prevent short cycling and premature pump wear.
The UP.240V.1P.2HP.HP is a high-performance horizontal cistern pump designed for efficient water transfer in residential and light commercial applications. Operating at 230V single-phase, this 2.0 HP pump delivers robust flow rates, making it ideal for systems requiring consistent water pressure.
The UP.240V.1P.1.5HP.HP is a high-performance horizontal cistern pump designed for efficient water transfer in residential and light commercial applications. Operating at 230V single-phase, this 1.5 HP pump delivers robust flow rates, making it ideal for systems requiring consistent water pressure.
The Pentair Intelliboost is a compact, all-in-one variable speed booster system designed to deliver constant water pressure in residential and light commercial applications. It integrates a multi-stage pump, variable frequency drive (VFD), pressure transducer, and expansion tank into a single unit for easy installation and operation.
The Tigerflow Ocelot is a compact, self-priming booster pump designed for residential and light commercial applications. Featuring a permanent magnet motor with an integrated variable frequency drive (VFD), it provides automatic pressure control and energy-efficient operation. 50 psi boost at 10 gpm Features Permanent magnet motor with integrated VFD Adjustable pressure setpoint and automatic control Self-priming up to 5ft AISI 304SS pump body and wetted component Built-in expansion tank for leak loads 120 VAC 3-prong cable connection Lightweight and corrosion resistant Operating Conditions Liquid temperature: 0°F to 104°F Maximum ambient temperature: 167°F Maximum altitude: 3,300 ft Maximum Working Pressure: 115 psi
The Pedrollo 1/1 is a durable medium-pressure submersible pump equipped with a float switch for automatic operation. Designed for clean water applications, it’s ideal for domestic pressure boosting, irrigation, and water transfer. Its corrosion-resistant stainless steel body and Noryl™ impellers offer high performance and long service life. The integrated float ensures the pump operates only when needed, preventing dry run damage. Suitable for both vertical and horizontal installation.
The Myers 20MD05121-01 is a high-head, filtered effluent pump designed for cistern and septic applications. It delivers strong, consistent flow for residential systems and is built for long service life in demanding environments.
The UP.480V.3P.2HP.HP is a high-performance horizontal cistern pump designed for efficient water transfer in residential and light commercial applications. Operating at 480V three-phase, this 2.0 HP pump delivers robust flow rates, making it ideal for systems requiring consistent water pressure.
The UP.240V.1P.1.0HP.HF is a robust horizontal cistern pump designed for efficient water transfer in residential and light commercial applications. Operating at 230V single-phase, this 1.0 HP pump delivers consistent performance with a compact footprint, making it ideal for installations where space is limited.
The Pedrollo TOP MULTI-TECH 5 is a submersible multi-stage pump designed for efficient and reliable water supply applications. Operating at 220V/240V, this pump is ideal for domestic water supply from reservoirs, tanks, or deep wells, as well as for irrigation systems. Its integrated electronic controller automates operation, activating the pump when system pressure drops (e.g., when a tap is opened) and stopping it when pressure is restored, ensuring consistent water pressure and protecting against dry running
240V/10216 TOP Multi Tech automatic submersible pump. 10 GPM @ 50 PSI, 60 PSI shutoff, 1 HP, start point 20 psi (fixed). Automatic dry run protection. Blockage/pump exerciser function. Thermal overload. Class F Insulation. 30' USA grounded plug. 1.25" NHT (or MPT???) connection. External pressure tank recommended, to prevent short cycling and premature pump wear.
The EPC 12 is a versatile electronic pump controller built for 120V and 240V systems. It manages pump operation based on system demand, with adjustable pressure setpoints and dry-run protection. This version does not include a pressure tank and is ideal for custom setups where a separate tank is used.
The Electrovarem EV003763PL16M000 is an advanced electronic pump controller designed for automatic water pressure management in residential and light commercial applications. It integrates a 0.8-gallon pressure tank and offers comprehensive protection features, including dry-run prevention, overpressure safeguards, and water hammer mitigation. This controller ensures consistent water pressure and extends pump lifespan by reducing frequent cycling.
The Electrovarem EV003763PL26M000 is a high-capacity pump controller designed for both 120V and 240V systems. It features a built-in 1-liter pressure tank, integrated check valve, and run-dry protection with automatic reset. Starts on flow to prevent nuisance cycling from leaks.
The UP.240V.1P.1.5HP.STD is a high-performance horizontal cistern pump designed for efficient water transfer in residential and light commercial applications. Operating at 230V single-phase, this 1.5 HP pump delivers robust flow rates, making it ideal for systems requiring consistent water pressure.
The UP.240V.1P.2HP.STD is a high-performance horizontal cistern pump designed for efficient water transfer in residential and light commercial applications. Operating at 230V single-phase, this 2.0 HP pump delivers robust flow rates, making it ideal for systems requiring consistent water pressure.
The Pedrollo UPM 2/2 is a compact, submersible multi-stage pump with a built-in float switch, engineered for reliable clean-water supply. With the motor positioned lower than the hydraulic section, this design prevents clogging—even after long idle periods. Crafted in stainless steel with Noryl™ impellers, it resists sand, leaves, and air bubbles. Ideal for domestic, civil, and light-agricultural water distribution, irrigation, and pressure boosting. It supports both vertical and horizontal installation and operates down to 3″ water submersion.
A series of multi-impeller submersible pumps engineered for enhanced reliability, thanks to innovative patented solutions that prevent stalling even after prolonged periods of inactivity. Highly efficient and reliable, these pumps are ideal for various applications, including water distribution in domestic, civil, and agricultural settings, particularly for water distribution in conjunction with pressure tanks, for irrigation, pressure boosting, and more.
The UP.240V.1P.1.5HP.HP is a high-performance horizontal cistern pump designed for efficient water transfer in residential and light commercial applications. Operating at 230V single-phase, this 1.5 HP pump delivers robust flow rates, making it ideal for systems requiring consistent water pressure.
The TOP Multi-Tech 5 is an automatic, multi-stage submersible pump built for cisterns, rainwater harvesting, and domestic water pressure boosting. It includes an integrated pressure tank and tee for quick setup and dependable operation.
TOP MULTI-TECH pumps are recommended for pumping clean water and liquids that are not chemically aggressive for the materials from which the pump is made. Because of their high efficiency and reliability they are suitable for use in applications such as domestic water supply from reservoirs, tanks or relatively deep wells, for drawing rain water from cisterns to water gardens or for use in irrigation systems, etc. An internal electronic device starts or stops the pump automatically when the tap is opened or closed.
The Sta-Rite P43B0030A3-C is a 3 HP, 230V, 3-phase, 4-inch submersible motor from the Pentek XE Series, designed for residential, commercial, and agricultural water systems. Constructed with 304L stainless steel and featuring a Kingsbury-type thrust bearing, this motor ensures durability and reliable performance in demanding environments.
